Pocketknives/Kitchen Knives/Fixed Blades
-
Sebbie small 21 is the one on my list, have had an eye on it for a while now. I like the the 3.5's for work
too, even though the Spyderco Military's blade is actually better for cutting stuff here.
Thanks mac, yeah, raise has been going to knives lately…Hope you can nab a Cruze Mini, nice little blade
there! Dave makes great knives, can't wrong with any of his.
Agreed Doug, Tinkers are fantastic I also carry a Leatherman Sidekick to work, and not a day goes by
where someone doesn't need it here. -
I was also looking at the little Silent Soldier from Brous but for the money I'd rather spring for a Cruze.
Today I carry an old 70s Case stag Copperlock lock back.
Last night the Curtiss started feeling a little weird in deployment, I think something got stuck in the detent ball housing maybe. Could be blood actually because I noticed I was bleeding from the tip of my flipper finger. The one design flaw with the F3 is that the heel of the blade is exposed when the blade is closed. I was testing it for sharpness and must have cut myself without realizing it. I have since filed it down. He should really fix that, it's easy enough to do and it makes the front choil more safely functional too.
-
Go for the Cruze, you'll be glad you did.
Have you ever tried Frog Lube? I got a sample recently at a knife show, used it on a couple sticky blades and
it works really well. -
I was gonna use CRK's grease but I will take a gander at frog–thanks for the tip!
-
Nano Oil!
-
Nano oil is great, absolutely, I use both that and the Frog Lube. Frog is good for a blade that is rust prone
so I use it on my Strider folders and my Medford Praetorian.
Nano for the pivot, for sure!Yeah, Para 2 is my next knife. Just having trouble finding it here in ACU with the silver blade…Sold out all
over town. -
I see it around once in awhile, I'll give you a heads up when I hear.
thespydercostore.com gets them fairly frequently
-
Well now I have more grease en route to my house than an orgy at Studio 54… Thanks y'all.
I hope a wash and lube will get the detent back to where it was. I can still flip but it lost some of its smoothness, almost feels and sounds like a really fine, flour-like grit is in the detent housing.
-
After you rinse it out blow out the excess water with an air can if you have one, then lube it up. Should
be good to go then.Thanks Doug, I see it too but I'm usually out to get something else and pass it up. Saw one about two
weeks ago, should have bought it but I went for a Strider WP with a Trisula/Telsa grind instead. -
That's one of the things that happens with IKBS. The little ball bearings are held in place with grease. Grease attracts dirt. I have a couple IKBS knives from CRKT, and they do get gritty once in awhile
Don't know if you want to do this, but taking apart the knife, get all the little ball bearings into a mason jar, and dousing it with Gunscrubber will get rid of all the old grease and dirt. Acetone works good too. Isopropyl alcohol works only if you get the stuff that's around 90%
Then you can use Militec 1 grease to put the ball bearings back
Or you can just get a knife with captured ball bearings and not worry about this crap anymore
-
The Trisula grind is awesome, and is pretty effective against an attacker if you use it properly. I used to have a Strider MV that was awesome, but that knife was bad mojo. I nearly cut off my left ring finger with it and on another occasion my left index finger while trying to unsheathe it. Sold it shortly after that
-
This is definitely not a bearings issue, when I pull the lock bar away from the blade the rasp goes away. It's also intermittent in the first place which is weird. So, it's something with the detent ball, 100%. If I scrape the detent ball and move it around with a credit card I can get it to flip well again for a while. I'm wondering if the ball has gotten flattened on one side.
Just need to rinse it and oil it but I don't want to use any of the oil I have in house so I'll just wait.
Dave does have instructions for taking care of the bearings as well, but I don't think that's necessary yet, this is a new knife.
-
Yeah, I tried that too, no dice. Still think it may be blood, or an awfully strange coincidence. I think WD-40 and lube should get it. And failing that, a trip to Granger, IN.
-
I've used WD-40, it works until it dries and that's it. If it's a new knife mac then that shouldn't be happening,
Doug's solution is the best bet but see if you can rinse it out and use some Nano oil, if you're still having
the problem I'd contact them or take it back.Yeah, the Trisula grind is insane, had to have one! Mine has a black G-10 handle, only one of 10 made.
Haven't gotten around to studying how to use it but I see how it can do some serious damage.
I'm not a collector of fixed blades but this one caught my eye. -
The WD-40 thing is more for solvency than lubrication. Dave's instructions on the bearings at least is to do a soak in that and then rinse and lube, IIRC.
I hit it with alcohol this morning and it was really nice, I'll lube the detent when I get some better oil in and see if that gets it.
Thanks guys! I really don't want to send the damn thing in.
-
Do what works mac, it may get smoother over time as well. Yeah, sending it in would be a hassle…Sure hope
you don't have to go that route. -
Yeah I don't think it's a "wear in" thing because it was smooth before and is intermittently so now. Guessing lubing the detent ball and track will get it done!
Today, a Case Russlock: